爱普生l351废墨收集垫清零

Epson L351 waste ink packing consists of two parts, the waste ink absorber and the waste ink collector. The waste ink absorber is a sponge pad located under the printer’s print head. It is designed to absorb excess ink that has accumulated during printing. The waste ink collector is a plastic bag located at the bottom of the printer. It collects all the waste ink that has been absorbed by the waste ink absorber.

1. Waste ink absorber

The waste ink absorber is a sponge pad located under the printer’s print head. It is designed to absorb excess ink that has accumulated during printing. The waste ink absorber needs to be replaced periodically to prevent the ink from leaking onto the print head or paper. It is important to check the waste ink absorber periodically to ensure it is not full. If the waste ink absorber is full, the printer will shut off and a message will be displayed on the screen telling you to replace the waste ink absorber.

2. Waste ink collector

The waste ink collector is a plastic bag located at the bottom of the printer. It collects all the waste ink that has been absorbed by the waste ink absorber. The waste ink collector should be emptied periodically to prevent the ink from leaking onto the print head or paper. It is important to remember to empty the waste ink collector after each print job to keep the printer functioning properly.

When the waste ink absorber and the waste ink collector become full, it is necessary to reset the waste ink counter. To do this, you will need to open the printer’s control panel and navigate to the settings menu. Once there, select the ‘Reset Waste Ink’ option and follow the instructions on the screen. This will reset the waste ink counter and allow the printer to continue functioning properly.

To prevent the waste ink absorber and waste ink collector from becoming full, it is important to use the printer correctly. Avoid over-filling the paper tray and printing too many pages at once. It is also important to keep the printer clean, as dust and dirt can clog up the waste ink absorber and waste ink collector.

Finally, it is important to replace the waste ink absorber and waste ink collector when they become full. This will ensure that the printer continues to function properly and print high-quality documents.

未经允许不得转载：远程打印机维修网 » 爱普生l351废墨收集垫清零