打印机m7650清零方法

The M7650 all-in-one printer is a reliable and user friendly office tool. It has a wide range of features, including an easy-to-use display, fast printing, and the ability to make copies.

In order to reset the M7650 all-in-one printer to its factory settings, you will need to complete the following steps:

1.Turn off the printer.
2.Press and hold the “Cancel” button.
3.Press and hold the “Start” button.
4.Keep both buttons pressed while you turn on the printer.
5.Continue to hold the two buttons until the display shows the “Ready” message.
6.Release the two buttons.
7.Press the “Menu” button.
8.Press “7” and “5” at the same time.
9.Press the “4” button.
10.Press the “Start” button.
11.Press the “1” button.
12.Press the “8” button.
13.Press the “Start” button.
14.The printer will reset to factory settings.

If you follow the steps outlined above, you can easily reset the M7650 all-in-one printer to its factory settings. This process should not take longer than a few minutes, and is a useful way to troubleshoot issues with your printer.

未经允许不得转载：远程打印机维修网 » 打印机m7650清零方法