brather打印机清零

Brather printers require regular maintenance in order to ensure accurate printing. One important procedure is resetting the printer to its factory settings, which can help fix printing problems or restore a printer back to its original condition.

To reset a Brather printer to its default settings, you need to enter its Service mode. To do this, turn off the printer’s power switch and then hold down the “Utility/Counter” key while turning the power switch back on. Once in service mode, you can reset the printer by pressing the “Reset” key.

Once the reset is complete, the printer will display a message that says “Factory Settings.” This indicates that the printer has been reset to its original settings.

To exit the Service mode, turn the printer off and on again, or press the “ON/OFF” key. After exiting Service mode, you can use the printer as normal.

It is important to note that resetting a Brather printer will erase all user preferences and settings, including any customized profiles. It is best to reset the printer if you feel that it is not printing accurately, or if you want to restore the printer to its original factory settings.

未经允许不得转载：远程打印机维修网 » brather打印机清零