打印机废墨仓计数器清零

Printer waste ink tank counters are set to measure how much ink is being used in the printer. When the counter reaches its limit, the printer will require new ink to be installed. To reset the printer waste ink tank counter, the following steps should be taken:

1. Turn off the printer and unplug any cables.

2. Make sure the printer is not connected to any computers or networks.

3. Open the printer cover and locate the waste ink tank.

4. Remove the waste ink tank with a pair of tweezers.

5. Locate the counter reset switch on the underside of the waste ink tank.

6. Push the reset switch and replace the waste ink tank.

7. Close the printer cover and plug in any cables.

8. Turn on the printer and make sure the counter is reset to zero.

After the counter has been reset to zero, the printer should be ready for use. If the counter does not reset to zero, repeat the steps again or refer to the printer’s manual for assistance.

未经允许不得转载：远程打印机维修网 » 打印机废墨仓计数器清零