富可视1822打印机清零

篇

Rich Visual 1822 Printer Resetting

一、将电源开关扳到OFF位置，将电源连接线从打印机的电源插座上拔下；

1. Turn off the power switch and unplug the power cord from the printer power socket.

二、按住打印机的清零按钮，将电源连接线重新插入电源插座；

2. Hold down the reset button of the printer and plug the power cord back into the power socket.

三、释放清零按钮，将电源开关扳到ON位置，然后按打印机上的顺序按钮，听到发出“咔嚓”的声音即可完成富可视1822打印机的清零；

3. Release the reset button, turn on the power switch and press the buttons on the printer in sequence. When you hear a “click” sound, the resetting of the Rich Visual 1822 printer is completed.

四、随后可以根据实际情况进行后续的设置，比如设置每页的行数、字段的位置和宽度等。

4. Afterwards, you can make follow-up settings according to actual situation, such as setting the number of lines per page, position and width of fields, etc.

以上就是关于富可视1822打印机清零的介绍，希望能帮助到大家。以上就是关于富可视1822打印机清零的全部内容，正确的操作可以使打印机长期运行正常，同时也能有效地节省维护费用。

Above is the introduction about Rich Visual 1822 Printer Resetting. Hope it will be helpful to you all. That’s all about Rich Visual 1822 Printer Resetting. The correct operation can make the printer run normally for a long time and also effectively save maintenance costs.

未经允许不得转载：远程打印机维修网 » 富可视1822打印机清零